Chenguang Fluoro & Silicone Elastomers Co., Ltd.
Products
Contact Us
  • Contact Person : Ms. he Blanninna
  • Company Name : Chenguang Fluoro & Silicone Elastomers Co., Ltd.
  • Tel : 86-28-85730628
  • Fax : 86-28-85730469
  • Address : Sichuan,Chengdu,Building No.1, Donghai Road, Jiaolong IND. Section, Shuangliu, Chengdu 610200, China
  • Country/Region : China
  • Zip : 610200

FSE FKM Pre compound BDF25EP for hose extrusion

FSE FKM Pre compound BDF25EP for hose extrusion
Product Detailed
Related Categories:Polymer
Fluoroelastomer is white and semi-tranparent elastomer and it is odorless, nontoxic, non-flammable.

BDF25EP

 

 BODA Fluoroelastomer BDF25EP   
 Technical Data Sheet  

CHENGDU CHENGUANG FLUORO-SLIICONE ELASTOMER CO., LTD

   

BDF25EP is a low viscosity curative incorporated fluoroelastomer copolymer.

 

With fast cure speed, this grade is well suited for application where good flowability and extrudability are required. BDF25EP can be compounded to meet the major fluoroelastomer specifications.

 

BDF25EP can be used for extrusion molding of profiles or tubes. It can be mixed using typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. Finished goods can be produced by a variety of rubber processing methods. Basic characteristics of the polymer are as follows:

Properties

Typical Values

Fluorine Content, %

66

Specific Gravity

1.80

Color

White

Solubility

LMW Ketones and esters

Mooney Viscosity ML

25

Typical Properties of BDF25EP

Test Compound

Polymer

100

MT Black (N990)

phr

30

MgO

Phr

3

Ca(OH)2

phr

6

Curing Condition

Press

10min at 170C

Oven

24h at 230C

Typical Rheological Properties

Monsanto Moving Die Rheometer (MDR2000®)

100cpm, 0.5°Arc, 6 minutes, 177

 

 

ML, Minimum Torque

N m

0.25

ts2, Time to 2 inch-lb rise from minimum

1' 25''

t90, Time to 90% cure

3' 10''

MH, Maximum Torque

N m

1.80

Typcial Physical Properties

Press Cure 10 minutes @ 170C

Post Cure 24 hours @ 230C

 

 

 

 

Tensile (ASTM D412)

Mpa

13.0

Elongation at break (ASTM D412)

%

220

Hardness (ASTM D2240)

Shore A

77

Compression Set, [ASTM D395 Method B (Disc)]

Aged 70 hours @ 200C

%

20

Because conditions of product use are outside s control and vary widely, User must evaluate and determine whether a Boda product will be suitable for users intended application before using it.

The following is made in lieu in all express and implied warranties (including warranties of merchantability and fitness for a particular purpose): If a Boda product is proved to be defective, Bodas only obligation, and users only remedy, will be, at Bodas option, to replace the quantity of product shown to be defective when user received it or to refund users purchase price. In no event will Boda be liable for any direct, indirect, special, incidental, or consequential loss or damage, regardless of legal theory, such as breach of warranty or contract, negligence, or strict liability.

 

 

 

OVERVIEW OF FACTORY      

 

 

 

 CERTIFICATES OF FSE

 

 

 

 

 

 

PROCESSING MANAGEMENT                    

 

 

 

 

 

 INSPECTION PROCESS

FSE FKM Pre compound BDF25EP for hose extrusion



Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.