FKM Pre-compounding Fluoroelastomer BDF401P

BDF401P is a medium viscosity curative incorporated fluoroelastomer copolymer.

This grade is well suited for application where good rheological properties and excellent compression set resistance are required. BDF401P can be compounded to meet the major fluoroelastomer specifications.

BDF401P can be used for compression molding of O-rings and gaskets. It can be mixed using typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. Finished goods can be produced by a variety of rubber processing methods. Basic characteristics of the polymer are as follows:

Properties

Typical Values

Fluorine Content, %

66

Specific Gravity

1.80

Color

White

Solubility

LMW Ketones and esters

Mooney Viscosity ML

40

Typical Properties of BDF401P

Test Compound

Polymer

100

MT Black (N990)

phr

30

MgO

Phr

3

Ca(OH)2

phr

6

Curing Condition

Press

10min at 170C

Oven

24h at 230C

Typical Rheological Properties

Monsanto Moving Die Rheometer (MDR2000®)

100cpm, 0.5°Arc, 6 minutes, 177C

ML, Minimum Torque

N m

0.30

ts2, Time to 2 inch-lb rise from minimum

1' 10''

t90, Time to 90% cure

2' 15''

MH, Maximum Torque

N m

2.40

Typcial Physical Properties

Press Cure 10 minutes @ 170C

Post Cure 24 hours @ 230C

Tensile (ASTM D412)

Mpa

14.0

Elongation at break (ASTM D412)

%

190

Hardness (ASTM D2240)

Shore A

78

Compression Set, [ASTM D395 Method B (Disc)]

Aged 70 hours @ 200C

%

15

Because conditions of product use are outside s control and vary widely, User must evaluate and determine whether a Boda product will be suitable for users intended application before using it.

The following is made in lieu in all express and implied warranties (including warranties of merchantability and fitness for a particular purpose): If a Boda product is proved to be defective, Bodas only obligation, and users only remedy, will be, at Bodas option, to replace the quantity of product shown to be defective when user received it or to refund users purchase price. In no event will Boda be liable for any direct, indirect, special, incidental or consequential loss or damage, regardless of legal theory, such as breach of warranty or contract, negligence, or strict liability.

OVERVIEW OF FACTORY      

 CERTIFICATES OF FSE

PROCESSING MANAGEMENT                    

 INSPECTION PROCESS