- Contact Person : Ms. he Blanninna
- Company Name : Chenguang Fluoro & Silicone Elastomers Co., Ltd.
- Tel : 86-28-85730628
- Fax : 86-28-85730469
- Address : Sichuan,Chengdu,Building No.1, Donghai Road, Jiaolong IND. Section, Shuangliu, Chengdu 610200, China
- Country/Region : China
- Zip : 610200
FLUOROELASTOMER PRECOMPOUND BDF45P
BDF45P
BODA Fluoroelastomer BDF45P | ||||||
Technical Data Sheet | CHENGDU CHENGUANG FLUORO-SLIICONE ELASTOMER CO., LTD | |||||
BDF45P is a medium viscosity curative incorporated fluoroelastomer copolymer.
This grade is well suited for application where good hot tear resistance and fast cure rate are required. BDF45P can be compounded to meet the major fluoroelastomer specifications.
BDF45P can be used for compression molding, extrusion and transfer molding of articles. It can be mixed using typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. Finished goods can be produced by a variety of rubber processing methods. Basic characteristics of the polymer are as follows: | ||||||
Properties | Typical Values | |||||
Fluorine Content, % | 66 | |||||
Specific Gravity | 1.80 | |||||
Color | White | |||||
Solubility | LMW Ketones and esters | |||||
Mooney Viscosity ML 1+10@121 | 45 | |||||
Typical Properties of BDF45P | ||||||
Test Compound | ||||||
Polymer | 100 | |||||
MT Black (N990) | phr | 30 | ||||
MgO | Phr | 3 | ||||
Ca(OH)2 | phr | 6 | ||||
Curing Condition | Press | 10min at 170 | ||||
Oven | 24h at 230 | |||||
Typical Rheological Properties Monsanto Moving Die Rheometer (MDR2000®) 100cpm, 0.5°Arc, 6 minutes, 177 |
| |||||
ML, Minimum Torque | N m | 0.40 | ||||
ts2, Time to 2 inch-lb rise from minimum | 50'' | |||||
t90, Time to 90% cure | 1'45'' | |||||
MH, Maximum Torque | N m | 2.18 | ||||
Typcial Physical Properties Press Cure 10 minutes @ 170 Post Cure 24 hours @ 230 |
|
| ||||
Tensile (ASTM D412) | Mpa | 14.5 | ||||
Elongation at break (ASTM D412) | % | 270 | ||||
Hardness (ASTM D2240) | Shore A | 74 | ||||
Compression Set, [ASTM D395 Method B (Disc)] | ||||||
Aged 70 hours @ 200 | % | 20 | ||||
Because conditions of product use are outside s control and vary widely, User must evaluate and determine whether a Boda product will be suitable for users intended application before using it.
The following is made in lieu in all express and implied warranties (including warranties of merchantability and fitness for a particular purpose): If a Boda product is proved to be defective, Bodas only obligation, and users only remedy, will be, at Bodas option, to replace the quantity of product shown to be defective when user received it or to refund users purchase price. In no event will Boda be liable for any direct, indirect, special, incidental, or consequential loss or damage, regardless of legal theory, such as breach of warranty or contract, negligence, or strict liability |
OVERVIEW OF FACTORY
CERTIFICATES OF FSE
PROCESSING MANAGEMENT
INSPECTION PROCESS
FLUOROELASTOMER PRECOMPOUND BDF45P